API Legacy AXS Operator'S Manual Download Page 80

Page: 80 / 103

L e g a c y A X S

A P I

GM INSERT SEND (Grand Master): Insert Send from the stereo Grand Master

Always active

Pre-fader

GM INSERT RETURN (Grand Master): Insert Return to the stereo Grand Master

Patched signal is inserted in the Program Master signal flow when

the INS button is engaged

Pre-fader

GM OUTPUT (Grand Master): Main outputs for the stereo Grand Master

•

Half-normalled to 2 TRACK INPUT 4

•

Outputs split if patched

2 TRACK INPUT 4: Input to 2-track recorder 4

•

Half-normalled from STEREO OUTPUT A, B, C

•

Breaking input: Inserted patch cord will replace normalled connection

2500C Stereo Bus Compressor Patch Points

2500 COMPRESSOR: 2500C stereo Bus Compressor patch points

•

IN: Left/Right compressor input

•

S/C (side chain): Left/Right input to the compressor detection path

•

OUT: Left/Right compressor output

NOTE: The 2500C Stereo Bus Compressor must be patched to be used.

Multitrack Patch Points

DIRECT OUTPUT: Channel Direct Output (as assigned)

Fed post-fader from the Large Fader by default

Half-normalled to the MULTITRACK INPUT

•

Outputs split if patched

MULTITRACK INPUT: Connection to multitrack recorder inputs

Half-normalled from DIRECT OUTPUT

Breaking input: Inserted patch cord will replace normalled

connection

MULTITRACK OUTPUT: Multitrack recorder returns

•

Half-normal to LINE INPUT

•

Outputs split if patched

LINE INPUT: Main line-level inputs

•

Balanced, low-impedance, line-level input

•

Half-normal from MULTITRACK OUTPUT

•

Breaking input: Inserted patch cord will replace normalled

connection

NOTE: The DIRECT OUTPUT, MULTITRACK INPUT/OUTPUT, and LINE IN patch points are associated

with the channels and are not part of the Multitrack Bus system. Since BUS OUTPUTS are

commonly patched to feed the multitrack recorder, the DIRECT OUTPUT, MULTITRACK

INPUT/OUTPUT, and LINE IN patch points are shown here.

Auxiliary Master Patch Points

AUX SEND OUTPUT: Auxiliary bus outputs

1-6 are mono aux outputs

7-12 are stereo (LT/RT) aux/cue outputs

Half-normalled to AUX DEVICE INPUT

Outputs split if patched

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands