API Legacy AXS Operator'S Manual Download Page 32

Page: 32 / 103

L e g a c y A X S

A P I

The SAFE button protects the Small Fader from being muted when the Solo-In-Place function

is active and another channel is soloed

Protects from global changes to channel routing (input and compressor)

Illuminates when engaged

Ø (Phase Reverse): Inserts a polarity inverter into the Small Fader path

Illuminates when engaged

PAN: This is the pan pot control for the Small Fader path

-2.5dB pan law

Left/Right panning to stereo Program Buses A, B, and C

Odd/Even panning to Multitrack Buses 1-24

The SM PAN button in the 624 Bus Assignment module must be engaged for the pan-pot to

work

ALT

: Routes Alternate Line Input to the Small Fader path input

The upper 200 slot Preamp Output is the default input for the Small Fader path

Will engage on all channels when the SM ALT LINE button is engaged in the Master Section

Illuminates when engaged

INS (Insert): Activates the Small Fader path Insert Return

Insert Send is fed from the output of the 500 Series EQ slot

Insert Send is always active

Insert Return is located pre the Small Fader

The Insert Return is active only when the INS button is engaged

Controlled by automation

Illuminates when engaged

SMALL FADER: Level control for the Small Fader path

45mm resistive fader

+10dB of gain

∞

dB of attenuation

Unity gain when set to 0dB

Global 0dB Fader Bypass (in Master Section)

Not automatable

NOTE: A 0dB Small Fader bypass can be applied to all channels by engaging the 0dB SM button

in the Master Section. This feature provides is useful an additional Small Fader gain stage

is not needed or when using DAW automation.

SOLO: Activates the selected solo function for the Small Fader path. The following solo functions may

be selected via the Master Section:

Pre-fader Listen (PFL): Non-destructive, mono

Pre-EQ & Insert Listen (PFL2): Non-destructive, mono

After Fader Listen (AFL): Non-destructive, panned

Solo-In-Place (SIP): Destructive, panned, post-fader

Will disengage when the SOLO CLR button is engaged in the Master Section

Illuminates in yellow when engaged

NOTE: AFL is the default solo mode.

MUTE: Cuts the Small Fader path signal

The MUTE button is the on/off switch for the Small Fader audio path

Can be engaged by Solo-In-Place solos

Controlled by automation

Illuminates in red when engaged

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands