API Legacy AXS Operator'S Manual Download Page 52

Page: 52 / 103

L e g a c y A X S

A P I

The diagram on the previous page shows the basic Stereo Program Bus signal flow from
channel Program Bus assignment, through the stereo Masters and Grand Master, to the 2Track
Inputs.

624SM Stereo Program Master Module

The 624SM Stereo Program Master Module contains

the controls for the three stereo Program Buses as

well as the stereo Grand Master.

Each of the four stereo Program Masters is

equipped as follows:

ON: ON/Off switch for the Program Master output

•

Illuminates when engaged

INS (Insert): Routes the Program Bus Insert

Return to the Program Master

•

Illuminates when engaged

GM (Grand Master): Routes the output of the

Program Master to the Grand Master Program Bus

•

Illuminates when engaged

CAL LT & RT

(Calibrate Left & Right): Left-Right

calibration trim pots for the Bus Master output

EXT (External Input): Routes the stereo signals at

the GM EXT IN patch points directly to the Grand

Master summing bus.

•

Grand Master only

•

Illuminates when engaged

The three stereo Program Buses may be fed simultaneously from the following sources:

•

Small Fader path output

•

Large Fader path output

•

Stereo Returns 1-6

Stereo Program Bus assignments from channels are made on the 624 Bus Assignment Module. Stereo

Program Bus assignments are made direct.

Stereo Grand Master

A stereo Grand Master Bus and Master Fader are provided to facilitate a wide range of operations. The

Program Masters, Stereo Returns, and an External Input can be routed to the stereo Grand Master Bus

for summing to a master stereo program output.

The following stereo sources can be routed to the Grand Master Program Bus:

Stereo Program Master A

Stereo Program Master B

Stereo Program Master C

Stereo Returns 1-6

External Stereo Source (on patch)

Routing to the Grand Master from the stereo Program Masters or Stereo Returns is accomplished by

engaging the GM button.

An external stereo line-level source can be routed to the Grand Master by patching the source into the

GM EXT IN patch points and engaging the EXT button in the Grand Master controls. The will route the

external source directly to the Grand Master summing bus.

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands