API Legacy AXS Operator'S Manual Download Page 66

Page: 66 / 103

L e g a c y A X S

A P I

CAUTION: Exercise great care when patching into any of the Amplifier Input (AMP IN)

patch points. There is no level control between these patch points and the

inputs to the monitor system amplifiers. Patching unattenuated signals into

these patch points can result in very loud output from the Control Room monitor

system.

Studio Loudspeaker Patch Points

EXT STUDIO MNTR INPUT (External Studio Monitor Input): External input to the studio monitor

source selector

•

The EXT IN button in the STUDIO monitor controls must be engaged for the

external source to be routed to the studio loudspeaker outputs

STUDIO OUT:

Outputs to the main and alternate studio monitor systems

L-R feed are the outputs for the main studio loudspeakers

ALT L-R feed are the outputs for the alternate studio loudspeakers

L-R points are half-normalled to STUDIO AMP INPUT

ALT L-R points are half-normalled to ALT STUDIO AMP INPUT

Outputs split if patched

STUDIO AMP IN: Inputs to the main and alternate studio monitor amplifiers

L-R feed are the inputs for the main studio amps

ALT L-R are the inputs for the alternate studio loudspeakers

L-R points are half-normalled from STUDIO OUT

ALT L-R points are half-normalled from ALT STUDIO OUT

Patching to these points will replace the feed to the studio monitor amps with

the patch cord signal

External Playback Source Patch Points

2T1-2T4 OUT (2-Track Outputs 1-4): Returns from the external 2-

track record/playback device outputs

Half-normalled to 2 TRACK MNTR IN 1-4

2 TRACK MNTR IN (2-Track Monitor Inputs):

Feeds the 2T1, 2T2, 2T3, 2T4 monitor playback selectors

Half-normalled from 2T1 – 2T4 OUT

Patching to these points will replace the feed to the 2 track

monitor selectors with the patch cord signal

6T1-6T2 OUT (6-Track Outputs 1-2): Returns from the

external 5.1 surround playback source outputs

Left, Right, Left Surround, Right Surround,

Center, and LFE

Half-normalled to 6 TRACK MNTR IN 1-2

6 TRACK MNTR IN (2-Track Monitor Inputs):

•

Feeds the 6T1 & 6T2 monitor playback

selectors

Half-normalled from 6 Track 1-2 OUT

Patching to these points will replace the feed

to the 6-track monitor selectors with the

patch cord signal

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands