API Legacy AXS Operator'S Manual Download Page 45

Page: 45 / 103

L e g a c y A X S

A P I

The Legacy AXS master bucket provides a comprehensive suite of master controls, facilities, and

features that address all the needs of modern audio production. These facilities include:

•

Master Channel Routing Controls

•

6 Assignable Stereo Returns

•

3 Stereo Program Bus Masters and Master Faders (A, B, C)

•

Stereo Grand Master and Fader (GM)

•

Main Stereo VU Meters

•

2500C Stereo Bus Compressor

•

Automation Controller

•

2 Automation Group Master Faders

•

24 Multitrack Bus Masters

•

12 Auxiliary/Cue Masters

•

Talkback Controls

•

Solo Controls

•

Meter and Peak Indicator Controls

•

Control Room Monitor Controls

•

Studio Monitor Controls

•

Oscillator

•

PSU Indicators

•

User Switches

Master Channel Routing Controls

The channel signal flow can be altered console-wide using the controls in the INPUT SELECT area of

the Master Section.

The INPUT SELECT controls function as follows:

FLIP: Swaps the input sources between Large and Small Fader paths globally

The Preamp Output will be routed to the Large Fader path

The Line Input will be routed to the Small Fader path

Input sources on individual channels can be reset by engaging the

FLIP

button on the 968 Input Module

Illuminates briefly when engaged to acknowledge activation, but then

goes out

SM ALT LINE:

Switches the Small Fader path input to the Alternate Line In (ALT)

globally

•

Replaces the preamp output with the Alt Line In as the Small Fader

path

source on all channels

The Small Fader input source on individual channels can be reset by

engaging the

ALT

button on the 968 Input Module

Illuminates briefly when engaged to acknowledge activation, but then

goes out

ALL CLR (All Clear): Returns all channel input routing to the default positions:

•

Resets the

FLIP

and

ALT

buttons on all channels

•

The Small Fader source will be the Preamp output

•

The Large Fader source will be the Line Input

•

Illuminates only when pressed

COMP LRG (Compressor to Large Fader): Routes the 200 slot processor into the Large Fader path

globally

The Compressor routing on individual channels can be reset by engaging the

COMP LRG

button

on the 968 Input Module

•

Illuminates when engaged

COMP BYP (Compressor Bypass): Bypasses the 200 slot processor on all channels

•

Illuminates when engaged

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands