API Legacy AXS Operator'S Manual Download Page 47

Page: 47 / 103

L e g a c y A X S

A P I

Stereo Return Modules 1-6

Every Legacy AXS is equipped with six Stereo Return modules, located in the master bucket.

The six Stereo Returns are designed to

provide extra capacity and flexibility

during mixing and support techniques

such as returning stereo stems to a mix,

returning virtual instruments and tracks,

parallel compression, effects returns and

other applications. Each Stereo Return

can be assigned to any or all the three

stereo Program Buses as well as directly

to the program Grand Master.

Each Stereo Return is equipped as follows:

•

Balanced, low-impedance, line-level inputs

•

Alternate input from associated pair of Multitrack Buses

•

Input TRIM: +/- 6dB

•

Balanced stereo INSERT (controlled by automation)

•

Mono input summing

•

Stereo Direct Output patch points

•

100mm long-throw resistive automated fader: +10dB to -∞dB range

•

MUTE (controlled by automation)

•

SOLO with Solo SAFE

•

5-segment LED meter

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands