API Legacy AXS Operator'S Manual Download Page 73

Page: 73 / 103

L e g a c y A X S

A P I

Stereo Program Buses A, B, C, and Grand Master (meters 25-32)

The feed to the channel VU meter is determined by the selection made using the VU SELECT controls

in the Master Section. These selections are global and apply to all channel VU Meters.

The METER SELECT controls for the channel VU meters function as follows:

VU LRG (Large Fader): Routes the Large Fader path input to the VU meters

•

Illuminates when engaged

VU SM (Small Fader): Routes the Small Fader path input to the VU meters

•

Illuminates when engaged

VU DIR (Direct Output): Routes the Direct Output to the VU meters

•

Illuminates when engaged

VU BUS (Bus Outputs): Routes the output of the Multitrack Buses 1-24 and the

Program Bus STA, STB, STC, and GM to the VU meters

•

Multitrack Buses 1-24 on channel VU meters 1-24

•

STA, STB, STC, and GM on channel VU meters 25-32

•

Illuminates when engaged

CHAN VU 0=+10: Inserts a -10dB pad before the channel VU Meter input

•

Use to meter high level signals

•

Illuminates when engaged

Channel Peak Indicators

Each fader path is equipped with a LED Peak Indictor. The peak reference level is set on a global basis

by the PEAK THRESHOLD selector in the Master Section.

PK (Peak): LED peak indicator for Small and Large Fader paths

•

A red LED illuminates when the selected Peak Threshold is reached in the audio path

PEAK THRESHOLD: Sets the peak reference level for the channel Peak Indicators

console-wide

+4dBu to +24dBu range

Located in the Master Section

Main Stereo Meters

A pair of large, high-quality VU meters are installed in the top bay of the master bucket for indicating

the stereo Program, Playback, and Solo levels.

The source for the Main Stereo Meters is selected

using the Control Room Monitor source selectors

(

MNTR

). Accordingly the Main Meters can be fed

from the following sources:

Stereo Program Masters (PGM MNTR):

A, B, or C

Grand Master

Aux Masters 7/8. 9/10, & 11/12

Solo Bus

External Playback Sources (PLAY MNTR):

2-Track 1-4

6-Track 1-2 (Left and Right)

While recording and mixing the Main Meters display the level of the stereo Program Master of the

Program Master that’s being used for mixing and monitoring. When a PFL or AFL SOLO is engaged, the

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands