API Legacy AXS Operator'S Manual Download Page 59

Page: 59 / 103

L e g a c y A X S

A P I

Auxiliary Masters 1-12

Auxiliary Bus Masters 1-12 are located above the Stereo Returns in the 265 Aux Master module. Each

Aux Master is the output control for the corresponding Auxiliary Bus.

Aux Bus Masters 1-6

provide output level

control for mono Aux

Sends & Buses 1-6.

The mono and stereo Aux Masters are identical with the exception of the AFL solo. Mono Aux Masters

1-6 are equipped with an individual AFL solo button for mono operation. Aux Masters 7/8, 9/10, 11/12

are equipped with a ganged AFL solo function for stereo operation.

The controls for all Aux Masters function as follows:

LEVEL: Output level control.

Feeds the AUX SEND OUTPUT 1-12

-∞ to +6dB range

ON (on/off): On/off switch for the Aux Bus outputs

•

Illuminates when engaged

T/B (Talkback): Routes the Talk Back output to the Aux Master

•

Talkback output will be added to the Aux Master output when the AUX

Talkback button is pressed in the Master Section.

•

Illuminates when engaged

AFL (After Fader Listen): Activates the AFL solo function for the Aux Master

•

AFL is the only solo function available for the Aux Masters

•

Each mono Aux Master (1-6) has an individual ALF button

•

Each pair of stereo Aux Masters (7/8, 9/10, 11/12) share a common AFL button for stereo

operation

•

Illuminates when engaged

Meter: Displays Aux Master output level

•

5-segment LED meter

Auxiliary Master Patch Points

AUX SEND OUTPUT: Auxiliary bus outputs

1-6 are mono aux outputs

7-12 are stereo (LT/RT) aux/cue outputs

Half-normalled to AUX DEVICE INPUT

Outputs split if patched

Aux Bus Masters 7-12

provide output level

control for stereo Aux

Sends 7/8, 9/10, and

11/12.

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands