API Legacy AXS Operator'S Manual Download Page 49

Page: 49 / 103

L e g a c y A X S

A P I

A balanced stereo Insert with an in/out switch is provided for each Stereo Return. Engage the INS

button to route the Insert Return to the Stereo Return signal path. Stereo Return Insert patch points

are available on the System patch bay.

In addition to Stereo Program Bus and Grand Master output assignments, the Stereo Returns have

Direct Outputs that are available in the System patch bay (STEREO RETURN DIRECT OUT).

Stereo Return Controls

The controls for the Stereo Returns function as follows:

GM (Grand Master): Routes the Stereo Return outputs to the Grand Master Program Bus

•

Illuminates when engaged

STC (Stereo C): Routes the Stereo Return outputs to the Stereo C Program Bus

•

Illuminates when engaged

STB (Stereo B): Routes the Stereo Return outputs to the Stereo B Program Bus

•

Illuminates when engaged

STA (Stereo A): Routes the Stereo Return outputs to the Stereo A Program Bus

•

Illuminates when engaged

TRIM: A6dB of gain or -6dB of attenuation to the input signal

•

Located pre-Insert Send

SAFE: Activates the Solo Safe mode for the Stereo Return

The SAFE button protects the Stereo Return from being muted when the Solo-

In-Place function is active and another return or channel is soloed

Illuminates when engaged

MONO: Sums the inputs of the Stereo Return to mono

•

Sums pre-Insert

•

Illuminates when engaged

BUS

: Routes the associated pair of Multitrack Buses to the input of the Stereo Return

•

Replaces the STEREO RETURN INPUT patch point as the Stereo Return source

•

Illuminates when engaged

INS (Insert): Engages the Insert Return in the Stereo Return signal path

Insert Send is fed post-TRIM

Insert Send is always active

Insert Return is located pre-fader

The Insert Return is active only when the INS button is engaged

Controlled by automation

Illuminates when engaged

SOLO: Activates the selected solo function for the Stereo Return. The following solo functions may be

selected via the Master Section:

Pre-fader Listen (PFL): Non-destructive, stereo

After Fader Listen (AFL): Non-destructive, stereo

Solo-In-Place (SIP): Destructive, panned, post-fader

Illuminates in yellow when engaged

NOTE: AFL is the default solo mode.

MUTE: Cuts the Stereo Return output signal

The MUTE button is the on/off switch for the Stereo Return

Can be engaged by Solo-In-Place solos

Summary of Contents for Legacy AXS








































































































Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands

API Legacy AXS, Operator'S Manual

Search results

Summary of Contents for Legacy AXS

Reviews:

Brands by name

Popular brands