Apach Bakery Line J 106 C, Use And Maintenance Manual

Page: 69 / 108

EN
Use and Maintenance manual J series ING Rev E;
Page 69 of 108
Turntable
It is a structure fitted inside the baking chamber in order to carry the racks that rest on only two wheels
during rotation. It is made of a round bottom layer and a support structure. In the centre of the round
layer there is a hooking system to hook racks
Automatic lifting of rack
It is a device that helps make loading and unloading of racks easier, chiefly if they are quite heavy.
It is fitted above the top of the oven and by means of a gear motor it lifts or lowers the rack that was
previously inserted into the oven.
After pushing the loaded rack into the oven, closing the door and starting the baking cycle, note that the
rack gets up of about 20 mm. Only after having got up completely rotation will start.
When baking has come to an end, by stopping the baking cycle, after the rack has stopped in its position,
it will come down until the wheels rest on the floor. It is thus ready to be loaded without any difficulty.