EN
Use and Maintenance manual J series ING Rev E;
Page 101 of 108
Setting the date, time and clock.
Press + and
– to place the cursor on the
Date and Clock
icon, then select the
Clock
setting
icon
.
Move the cursor to set the clock date and time (select the parameter to set, press
Enter
to
do the setting, set the value and press
Enter
again to confirm the value set and store it to
memory).
Programmed Start setting
Press + and
– to place the cursor on the
Date and Clock
icon, then select the
Programmed Start
icon
.
Set the time on the day of the week when you wish to start the
device. To enable the delayed start press
ON / OFF
If the delayed start is active on the main page the device shows the weekday / time set
for the oven start, the current time / date and the corresponding icon. When the time set
has arrived the device starts in the STOP configuration, the temperature being adjusted
at the setpoint.
Summary of Contents for Bakery Line J 106 C
