Bitek Technology
ANYTRON ANYCUT1 User Manual
© 2016 Bitek Technology. All rights reserved.
User Document
Rev 1.0.0 – 2016.03.06
77 of 120
4
you can check the Beamcut
version updated in About menu
of Beamcut.
5
Precautions when operating the laser
5.1
The Laser Operating Environment
The laser has a high output in the lower temperature. laser reaches a plateau with the decreased
about 5% after the laser source starts to work until it maintains the temperature as 40 degrees.
At this time, until its temperature reaches a plateau, it spends each time about 10 mins in a
summer, 30mins in a winter. And then, when it reaches a plateau, it is possible to cut with a stable
power. Therefore, a user has to keep the reasonable temperature and humidity, regardless of the
season.
(Temperature 15 - 25˚C, Humidity 40 – 60% RH)
※
The cooling fan that is installed in the back of the machine is to prevent the over heating. And
it works automatically when machine running.