Anytron Any-cut1 User Manual Download Page 69 | Manualshive

Page: 69 / 120

Anytron Any-cut1 User Manual Download Page 69

Bitek Technology

ANYTRON ANYCUT1 User Manual

© 2016 Bitek Technology. All rights reserved.

User Document

Rev 1.0.0 – 2016.03.06

69 of 120

10

Select  the  On  in  Vision  On/Off
menu and enter the values for X
and Y.
(X = Width, -0.059 / Y = Height,
-0.070)
* Insert (-) mark when it enters
values.
*  When  using  the  black  mark
that  has  the  same  size  and  a
type, it does not need to register
the vision mark again.

※ When the machine is delivered, the 3x3mm vision mark is already set in the machine and software,
if users use the same vision mark with that, they can only do step 3.2.3.1 in this manual.

※ How to Upload Firmware of Vision

Since the vision firmware is already uploaded when the machine is delivered, a user does not need to do

it seperately. However, if they have to upload the vision firmware unavoidably, Auto VISION Software

should be closed and be run. Also, if the firmware uploading is stopped abnormally when is terminated

during uploading the firmware or the power of PC is turned off or etc., it can affect the vision camera.

1

Start > Microscan AutoVISION >
Tools > Device Firmware Update

«
...
67
68
69
70
71
...
»

Summary of Contents for Any-cut1

























































































































Reviews:

No comments