Anytron Any-cut1 User Manual Download Page 26

Page: 26 / 120

Bitek Technology

ANYTRON ANYCUT1 User Manual

User Document

Rev 1.0.0 – 2016.03.06

26 of 120

3.2

Software

The software to run Anycut is divided into Illustrator Plug in program and Beamcut program to control

the station. Anycut operates through the communication between them.

3.2.1

Illustrator

Anycut uses Illustrator to edit cutting images. also, Plug in programs to set the laser are installed in

Illustrator and it is factory installed when the product ships, but user needs to reinstall due to the license

sometimes.

# You can get plug in program install manual from the dealer.

# when user register the license, please download CS6 version, not CC.

3.2.1.1

ArtBoard Setting for Anycut

- Coordinate : standard of the top left corner x, y (0, 0)

- ArtBoard Size : 210 x 210mm

※ The height of ArtBoard can be less than or more than 210mm depens on the images to

cut.

Summary of Contents for Any-cut1























































































































Search results

Summary of Contents for Any-cut1

Reviews:

Anytron Any-cut1, User Manual, Page: 26 / 120

Search results

Summary of Contents for Any-cut1

Reviews: