Anytron Any-cut1, User Manual, Page: 56 / 120

Bitek Technology ANYTRON ANYCUT1 User Manual
© 2016 Bitek Technology. All rights reserved.
User Document
Rev 1.0.0 – 2016.03.06
56 of 120
<Picture A> <Picture B>
<Picture A>: The cutting posiiton about the first image is correct, but when we look overall cutting
poistion, the cut line is going down more and more. In other words, it means that the media
feeding amount is too much. In this case, Feeder Adjust needs to be decreased and it will be
solved.
<Picture B>: The cutting position about the first image is correct, but when we look overall cutting
position, the cut line is going up more and more. it means that the media feeding amount is too
less. In this case, Feeder Adjust needs to be increased and it will be solved.
B. For Long Label ( label length ＞ 210mm )
<Picture A> <Picture B>
<Picture A>: When it cuts by Split Size, if the cut line doesn't meet each other like <picture A>,