39
FUNCTION MENU SETUP
Single Band Mode (VHF/UHF)
1. Press
key, the top left corner of the LCD will display " " icon, then press
key to enter into function menu.
2. Press
/
key to choose NO. 14 function item, it shows "
BAND
" on LCD.
3. Press
key to enter next menu, press
/
key to choose desired setting.
ON:
Band limit is enabled.
OFF:
Band limit is disabled.
When this function is on, the input frequency and scanning of frequencies under VFO is limited to the
current active VFO frequency band (VHF or UHF).
4. Press
key or
key to confirm and exit.
Sub Band Display Setup
FREQ:
Display sub band frequency or channel.
VOLT:
Display current battery voltage.
OFF:
Sub band display is disabled.
4. Press
key or
key to confirm and exit.
1. Press
key, the top left corner of the LCD will display " " icon, then press
key to enter into function menu.
2. Press
/
key to choose NO. 15 function item, it shows "
DSPSUB
" on LCD.
3. Press
key to enter next menu, press
/
key to choose desired setting.
