22
BASIC OPERATIONS
Add a channel
Delete a channel
Under frequency mode (VFO), after you have set up your desired frequency and settings (read through
1.
the Function Menu Setup in order to understand how to set your desired frequency settings), Press
the
key, the top left corner of LCD will display the " " icon, then press the
key to enter the
manual channel programming mode, the channel number will begin flashing.
Press the
2.
/
buttons until the Channel number displays the channel you would like to program
(000-199)
Press the
3.
key, the top left corner of LCD displays " " icon, and hold the
key until the
transceiver emits confirmation beep. Your new channel has been programmed successfully.
While your radio is in standby, Press the
1.
key, the top left corner of LCD will display the " " icon,
then press the
key to enter the manual channel programming mode, the channel number will begin
flashing.
Press the
2.
/
buttons until the Channel number displays the channel you would like to program
(000-199).
Press the
3.
key, the top left corner of LCD displays " " icon, and hold the
key until the
transceiver emits confirmation beep. Your channel has been successfully deleted.
Limit VFO frequency scanning range
Setting the frequency of L1 channel, U1 channel, L2 channel, and U2 channel will set a VFO frequency
scanning border (channels are found before channel 0 and after channel 199). L1 and U1 must be used
