36
FUNCTION MENU SETUP
Talk Around ON/OFF
ON:
This will turn on the Frequency reverse function, TX and RX frequency of the current channel will
be switched. If there is a CTCSS/DCS signaling set, they will also be interchanged.
OFF:
This will turn off Frequency reverse function.
When this function is is turned on, the transceiver will stop communication with a
repeater (it will remove the Offset).
4. Press
key or
key to confirm and exit.
1. Press
key, the top left corner of the LCD will display " " icon, then press
key to enter into function menu.
2. Press
/
key to choose NO. 09 function item, it shows "
TALKAR
" on LCD.
3. Press
to enter next menu, press
/
to choose desired setting.
TX=RX:
Turn on Talk Around function, current channel will transmit at RX frequency, if CTCSS/DCS
signaling is set, it will set the encoding to be the same as the CTCSS DCS decoding
OFF:
Close Talk Around function.
4. Press
key or
key to confirm and exit.
Offset Frequency setup
This function will allow your radio to communicate through a repeater. When the repeater receives signals
at one frequency, it will transmit them on another frequency. The difference between these two frequencies
is called the offset frequency.
