4
NOTE:
If the transceiver is PC programmed to channel mode and locked,you can not return it to the amateur transceiver
modes manually .
"NAME", it enters into Name Tag + Channel Mode. In this mode, it will display the corresponding
channel name (if you have given a Channel name in the memory). If no name is given, it will display
the fre channel number. Channel operations are the same as described in fre
channel mode. (As pic 2)
VFO Mode(Frequency mode):
C.
This mode shows only frequency on the display. You can enter this
mode by simple pressing the "
" key, while you are in both FREQ and NAME Channel Modes.
Shortcut operations and Channel settings are able to changed & stored as the latest values. Even if
the radio is turned off, the settings remain the same until the next VFO change. (or if it is changed to
a new VFO frequency).(As pic 3)
Professional Transceiver Mode:
31
When setting the display mode as "CH" (Channel), it will enter into
the Professional Transceiver mode. In this mode all functions (except scan, DTMF encode or editing,
and keypad lock) should be set by PC software (As pic 4).
Under every mode, background operations still can be changed and saved.
41
USER MODE SETUP:AMATEUR OR COMMERCIAL RADIO
