21
BASIC OPERATIONS
Side Key [PF1]/[PF2] function instruction
VOLT:
1.
Battery capacity inquiry: Under standby, press [PF1]/[PF2] key, the LCD displays the current
battery capacity, press the key again to exit.
CALL:
2.
Transmit the pre-stored DTMF Encode signal
ALARM:
3.
Activated by a long press of the [PF1]/[PF2] key. The LCD will display "ALARM" and the
transceiver will enable the preset alarm function.
SUBPTT:
4.
Press [PF1]/[PF2] key, transceiver will transmit on the sub-band frequency (use this function
to enable "Dual PTT").
LAMP:
5.
Press [PF1]/[PF2] to turn on/off the flashlight.
Transmit tone pulse frequency:
6.
Press and hold [PTT] key, then press [PF1]/[PF2] key to transmit the
selected tone pulse frequency. The tone pulse frequency can be set to 1750Hz / 2100Hz / 1000Hz /
1450Hz.
MONI Key Function
Squelch off:
1.
Press [MONI] key, which will open the squelch, you will hear any noise on the frequency.
Press [MONI] again, to close the squelch.
Monetary Squelch off:
2.
By holding the [MONI] key, the squelch will open, you will hear any noise on
the frequency, By releasing [MONI] you will close the squelch.
Transmit DTMF:
3.
Press [PTT] and [MONI] to transmit DTMF signaling.
Press and hold [MONI]
4.
while turning on the radio until the radio emits a responsive beep. This allows
you to enter into the advanced function operations.
