Antec Scientific ROXY Exceed, User Manual, Page: 57 / 126

Chapter 5 Operation modes & Parameters 57
Navigation in dual cell menu
All menus for a dual flow cell system are similar to a single cell system with
2 exceptions. First, in the top right corner a number is visible which indi-
cates the active cell in display. Toggle with the “+” and “-“ buttons between
sensor boards. If the board number does not change it means that the sec-
ond sensor board is not installed or not properly recognized. Second, a
new status screen is available in dual cell systems which indicates the sta-
tus of both cells in a single screen. However, for convenience it is advisa-
ble to use PC control from the Clarity Chromatography software or Dia-
logue Exceed software when working with 2 flow cells.
Fig. 15. ROXY Exceed main menu (top) with active cell indicator in top
right corner. Multi-STAT screen showing cell 1 (DC mode) and cell 2
(PULSE mode).
Parameters
Operational parameters are controlled from the SETUP screens in the
ROXY Exceed. Parameters are filter, cell potential and offset. Temperature
is set in CONFIG menu.
Fig. 16
. Selection of parameters in the ‘DC SETUP’ screen. Temperature
is set in CONFIG menu.
T e m p = 3 0 ° C C o n t r a s t = 2 0 C O N F I G
V a l v e = 3 V o u t s o u r c e = D A C
I D 1 m a s t e r = n o
P R E V I O
R a n g e = 5 0 n A M a x C o m p = 2 . 5 µ A D C 1
E c = + 0 . 5 0 V # O f f s = + 1 0 % S E T U P
F i l t = . 0 0 2 H z
P R E V P O L A R = + E V E N T S N E X T