Antec Scientific ROXY Exceed, User Manual, Page: 31 / 126

CHAPTER 2 Installation 31
below.
•
When a ROXY Exceed potentiostat is available it is automatically
detected and the IP address is shown in the port settings box. If
not press port scan or type in the default IP address 192.168.5.1.
•
The pull down field shows all responding devices with their IP and
MAC address. In case of doubt check the device unique MAC
address on the rear panel IO connector.
•
Type OK. The instrument will connect and is ready for use.
LC connections
In this section the installation & priming of all relevant fluidic connections
are described to be able to use the ROXY Exceed to perform REDOX re-
actions. When working with mobile phase solutions take the following pre-
cautions:
Use proper eye and skin protection when working with solvents. The
solvents used may be flammable, toxic or corrosive. Organic sol-
vents are toxic above a certain concentration. Ensure that work areas
are always well-ventilated! Use of open fire in the vicinity of this sys-
tem must be strictly prohibited. Do not install the system in the same
room with any other equipment that emits or could potentially emit
sparks. Wear protective gloves, safety glasses and other relevant
protective clothing when working on the device!