Anritsu MG369 Series, Operation Manual

Page: 172 / 268

PULSE MODULATION LOCAL OPERATION
MODE –MENU MAPS
4-18 MG369XB OM
Modulation
Pulse Modulation On/Off
Select Internal Pulse Source
Select Low Level Trigger or
High Level Trigger
Turn Step Delay On/Off
Edit Selected Pulse
Width or Delay
Internal Pulse Modulation
External Pulse Modulation
Select Pulse Modulation Trigger Mode
Select Pulse Modulation Mode
Select PRF or Period
Select Low Level Trigger or
High Level Trigger
Select 100 MHz or 10 MHz
Pulse Generator Clock**
Note: Use the keypad cursor
keys to highlight the
pulse mode.
Note: Use the keypad cursor
keys to highlight the
trigger mode.
Select External Pulse Source
Pulse Modulation On/Off
Edit PRF
Note: Use the keypad cursor
keys to highlight the
fields.
*
* The Step Delay Menu is only available
when Delayed or Triggered with Delay
triggering modes are selected.
** 100 MHz pulse clock rates are available
with Option 26; 40 MHz pulse clock rates
are available with Option 24. Set Step Delay Start Time
Set Step Delay Stop Time
Set Step Delay Step Size
Set Step Delay Time
Set Negative Edge Trigger
Set Positive Edge Trigger
NOTE
Refer to Chapter 3, page 3-106,
for pulse modulation operat-
ing instructions.
Figure 4-14. Pulse Modulation Menu Map