Anritsu MG369 Series, Operation Manual

Page: 75 / 268

Selecting an Alternate Sweep Power Level
Press
Alternate Level >
to access the Alternate
Level menu display (below).
Select the power level for the alternate sweep range
(
L0 [AL0], L1 [AL1], L2 [AL2], L3 [AL3]
, or
L4 [AL4]
).
The menu then displays the current level parameter
for the selected power level. If you wish to change
the level, press
Edit L2
to open the parameter, then
edit it.
The
Edit L1
soft-key is provided to let you change
the power level of the main sweep.
When you are done selecting the power level for the
alternate sweep range and editing the power level of
the main sweep, press
< Previous
to return to the
Alternate Sweep menu display.
MG369XB OM 3-41
Local (Front Panel) Operation Sweep Frequency Operation
Performing alternate sweeps using power levels that cross
step attenuator switch points can cause excessive wear on
the switches and reduce the life expectancy of the step
attenuator.
CAUTION