ANITA ©
GPS/G serie
9
Warning marks
positioning
For safety‘s sake, the warning marks are lapelled on the machine. Please
pay attention to the notes on warning marks when you operate the
machine. One mark is on the control box and one is under the machine on
the stand.
Marks content
4) SAFETY INSTALLATION
A. In order to prevent the accident resulting from disoperation, the machine can not be used
10% beyond or 10% under the formal voltage.
B. In order to prevent the accident resulting from disoperation , the using air pressure devices
such as air cylinder should be validated on their authorized pressure in advance.
C. For safety, please use under the following conditions.
●
The ambient temperature of the running machine is from 5 to 40 Celsius degree.
●
The ambient temperature of preserving the machine is from -10 to 60 Celsius degree.
D. Humidity: within 20
～
80% (relative humidity)
E.
The max pressure of air consumption is 5,5 MPa. Check it before first using of
machine.
5) ELECTRIC DEVICE SETTING
A. power voltage
●
The voltage is only used with the varying range of 10% of the normal voltage.
●
Power frequency should be kept within
（
50Hz
)
1% varying range of normal frequency in.
B. electromagnetic wave noise The power should not be adjacent to strong magnetic field or
high frequency stuff.
C. Sticking other devices or small ornamental articles onto the adjusting box should be under
safe low voltage.
D. The liquid such as water or coffer is prevented from flowing into the adjusting box or
motor.
E. The adjusting box or the motor should not be located on the ground electric device setting.
www.garudan.cz
