ANITA ©
GPS/G serie
19
B) Interpose loose thread brake location
a)Cancel loose thread replacement spring.
b)Loosen loose thread brake , adjust the distance between adjust drive pole and loose line pin
is 0.3mm, when push loose thread brake to right , the distance between adjust drive pole and
loose line pin will be reduced , push it to left and the distance will be increased.
c)Install loose thread replacement spring.
[Notice]
In order to prevent
accident, must use
tools when change
loose thread
replacement spring.
Fig. 27
C) The way of adjust thread splint clearance
a) Across to organ unclose thread splint .
b) Inside thread splint clearance is 0.6-0.8mm
commonly, when use thick material ,the distance
is 0.8-0.1mm .
a)
Finally fix screw.
[Notice]
In order to prevent accident, must use tools when
change loose thread replacement spring.
Fig. 28
www.garudan.cz
