ANITA ©
GPS/G serie
7
In this manual, “danger”,“ warning” and “attention” marks are shown on the point’s
concerting safety issues. If not following its instruction, the person may be hurt and
mechanical troubles may be caused as well.
products
transportation
Transportation should be done by the person who is familiar with safety
guide and rules. Special Attention should be put on the following
aspects.
a
)
It should be done by two people at the same time.
b
)
To guarantee the safety, be sure to clean oil dirt on hands
Installation
Because there is possibility that installing environment may result in
mechanical obstruction and damage, please respect the following items:
a
)
Unpacking procedure should be done from top to bottom. As in case of
wooden package, please take care of nails on corners of it.
b
)
Dust and moisture are the causes of mechanic contamination and
eroding. So ventilation device should be installed and periodical cleaning
should be done as well.
c
)
Direct light should be avoided because long time of exposure under
direct light may change the color of machine or cause its distortion.
d
)
Provide enough running room, leaving a space of 50cm around.
e
)
It is strictly forbidden to risk running in case of possible explosion. It
can not be used in air filled with suspended mote, in fog or under oxygen.
Maintenance
When maintenance is needed for the machine, the authorized staff from
the company should perform this task.
a
)
For cleaning, turn off power first, leave 4 minutes for complete
discharge, and then do repair work.
b
)
Before consulting the manufacturer, the model or parts can not be
freely changed.
c
)
For repairing, the origin parts from the manufacturer should be used.
d
)
After repairing, all the safety covers should be put on again.
www.garudan.cz
