ANITA ©
GPS/G serie
18
7. Adjust footplate part
Fix screw , decrease the distance between press-feet left (1) and right (2) , make two
footplates could press the axis nail in press-feet .if use thin material or the pressurer is less ,
move the electromagnetism - iron (5) along A position, the last close the screw .
[Notice]
Press-feet arm left and the right angle inconformity move screw possibly broken when
assembling machinery , direction moves electromagnet (5) to A potion the to the end press-
feet now moving upward , moving facing the right about to the end the pressure of footplate
could decrease and then middle treadle of sewing is able to reset
Fig. 25
8.
Adjustment loosening thread of component
A. Set up loose thread breach location
(26)
Move loose thread breach , let loose line breach
(1) long hole on the right can touch at low-lying
area line screw (2)column location, and then fix
screw.
[Notice] When location is inexact, mabe
remains reduce or unsure , so when the machine
run could, it will occur the thread drop .
Fig. 26
www.garudan.cz
