- 5 -
3269870_ut_GB_rev.2
ENGLISH
GB
Even if the equipment has all its safety devices,
if necessary, during the installation and connec-
tion other safety devices may be supplemented
in accordance with applicable laws.
The illustration shows the position of the
devices.
A)
Gas supply tap
: for turning the connection to
the gas supply line on and off .
B)
Combustion control unit
: cuts off the gas
supply if the fl ame goes out.
C)
Safety thermostat
: cuts off the gas supply in
case of overheating.
Importante
Important
Make a daily check that the safety devices are
properly installed and in good working order.
SAFETY DEVICES
C
C
A
A
B
B
0N1FR*ID
0T1FR*ID
1N1FR2ID
1T1FR2ID
A
E
D
G
F
ɉɊɈɂɁȼɈȾɂɌȿɅɖɇȿɇȿɋȿɌɈɌȼȿɌɋɌȼȿɇɇɈɋɌɂɁȺɄȺɄɈɃɅɂȻɈɍɓȿɊȻɉɊɂɇȿɋɈȻɅɘȾȿɇɂɂɉɊȺȼɂɅ
ɆɈɇɌȺɀȺɂɗɄɋɉɅɍȺɌȺɐɂɂ
ȺɉɉȺɊȺɌȾɈɅɀȿɇɍɋɌȺɇȺȼɅɂȼȺɌɖɋəɋɈȽɅȺɋɇɈȾȿɃɋɌȼɍɘɓɂɆɉɊȺȼɂɅȺɆɂɂɋɉɈɅɖɁɈȼȺɌɖɋəɌɈɅɖɄɈȼ
ɏɈɊɈɒɈɉɊȼȿɌɊɂȼȺȿɆɕɏɉɈɆȿɓȿɇɂəɏ
37M3202
B
C
3168040
SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs
provided.
A)
Nameplate with manufacturer and
appliance data.
B)
General hazard
: read the manual carefully
before carrying out any procedure.
C)
General hazard
: when washing the appli-
ance do not point pressurised water jets at
internal parts.
D)
General hazard
: all relevant regulations
must be complied with. “Install in compli-
ance with the relevant regulations and use in
well ventilated premises only”.
E)
General hazard
: all relevant regulations
must be complied with. “No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions”.
F)
General hazard
: watch out for hot surfaces.
G)
CE marking
: this indicates that the
equipment is compliant with all relevant laws
applicable to the product.
