ANALOX ADM Aspida, User Manual

Page: 27 / 45

ADM & Sub Aspida
User Manual
Int. Approved
Document ref: PSA-811-22 March 2020 Page 27 of 45
Copyright © 2017 Analox Ltd. All Rights Reserved.
Commercial in Confidence
6.23 Troubleshooting
Symptom Possible cause Action
Device does not switch on No batteries, or incorrectly
orientated batteries Check that batteries
are inserted
correctly
Device does not switch on Batteries are flat Check that the
batteries are
inserted correctly
and are
rechargeable NiMH
then perform a
device charge.
Batteries will not charge (
shown flashing)
Batteries may not be
rechargeable type Check that the
batteries fitted are
the rechargeable
NiMH batteries
supplied with the
Aspida
Batteries will not charge (
shown flashing)
Aged batteries causing a
charge fault Contact supplier for
information about
replacing
rechargeable
batteries
Batteries will not charge (
shown)
No batteries fitted Check that
rechargeable
batteries are fitted
Battery charge completes but
battery life is short Battery ageing reduced battery
capacity Contact supplier for
information about
replacing
rechargeable
batteries
Flashing symbol underneath
gas reading The sensor is due a
recalibration Refer to section 7.2
of this manual for
instructions
Flashing symbol underneath
oxygen gas reading The oxygen sensor is due to be
replaced Refer to section 7.5
of this manual for
instructions