ADM & Sub Aspida
User Manual
Int. Approved
Document ref: PSA-811-22
March 2020
Page 33 of 45
Copyright © 2017 Analox Ltd. All Rights Reserved.
Commercial in Confidence
1]
Remove the top 4 screws from the device using a cross-head screwdriver as
shown in Figure 25. Retain the screws along with the sealing washers.
Figure 25
Remove the sensor cap screws
2]
Gently remove the sensor cap as shown in Figure 26.
Figure 26
Remove the sensor cap
WARNING: DO NOT TOUCH THE INSIDE OF THE (INSTRUMENT OTHER
THAN AS NOTED IN THESE INSTRUCTIONS) WITHOUT
APPROPRIATE ANTI-STATIC PRECAUTIONS.
Summary of Contents for ADM Aspida
Page 2: ......
