ADM & Sub Aspida
User Manual
Int. Approved
Document ref: PSA-811-22
March 2020
Page 12 of 45
Copyright © 2017 Analox Ltd. All Rights Reserved.
Commercial in Confidence
4.3
Gaining access to the ADM Aspida (When faceplate is fitted)
To gain access to the ADM Aspida for either USB connection or sensor change the following steps
should be followed.
Firstly, remove the ADM Aspida from the instrument panel by removing the four M5 x 25mm Pozi
Pan screws.
Turning the ADM Aspida over, remove the two left most screws and washers from the tie bases.
You should now be able to remove the Aspida main unit from the panel and be able to remove the
battery cover as described in section 4.4
Summary of Contents for ADM Aspida
Page 2: ......
