ADM & Sub Aspida
User Manual
Int. Approved
Document ref: PSA-811-22
March 2020
Page 15 of 45
Copyright © 2017 Analox Ltd. All Rights Reserved.
Commercial in Confidence
The following lists the conditions that may be observed during a charge.
Battery icon state
Audible warning Charge status
>>
(animated)
None
Charging (charge setup)
>>
>>
(animated)
None
Charging
>>
(animated)
None
Charging (Approx. 1.5
hours remain)
Success beep
Charge complete
(flashing)
Fault beep
Charge fault Batteries not
rechargeable
Fault beep
No batteries
The normal charge period for a set of fully discharged batteries is approximately 4.5 hours.
NOTE:
DURING CHARGING, THE DEVICE WILL WARM UP. THIS
EFFECT IS NORMAL. IT IS HOWEVER SUGGESTED THAT THE
DEVICE IS CHARGED INDOORS AT ROOM TEMPERATURE TO
ENSURE A FULL CHARGE CYCLE COMPLETES.
Summary of Contents for ADM Aspida
Page 2: ......
