17
A. BATTERY REMOVAL
(fig.1-2)
To remove the batteries for transporting or servicing:
Remove Batteries:
(fig.1-2)
a - Push tabs together towards the center to release
the door (A).
b - Drop the panel (B)
c - Carefully pull battery pack until cable connection
is accessible
d - Disconnect and pull battery pack to full
deployment to remove it.
e - Lift the battery from the compartment using the
battery carrying straps.
f - Repeat operation in reversed steps to put the
batteries back in.
!
WARNING
Batteries may weigh up to 55 lbs. (25 kg) each. Care must
be taken to avoid injury when lifting.
B. SWING-AWAY FOOTRESTS
(fig.3-4)
1. Installation:
(fig.3)
a - Place swing-away pivot pin (C) into the locating
hole on top of the hanger mount with the footrest
facing outward from frame.
b - Rotate the footrest inward until latch plate locks (D)
into place.
2. Removal:
(FIG.4)
a - To remove footrest, press quick-release lever (E).
b - Rotate footrest outward and lift (F).
3. Height Adjustment:
(fig.4)
a - Remove both bolts (G) in the hanger frame tube.
b - Reposition the footrest.
c - Re-tighten all bolts (G).
VIII. SET-UP
u
3
2
4
1
A
D
B
E
F
C
G
Summary of Contents for R HybridHybrid
Page 1: ...Rev 01 February 2017...
