20
2. VR2 Joystick
*Please refer to the user’s manual
provided with informa tion package.
C. ENHANCED DISPLAY
Please refer to the PG Drives Enhanced Display owner’s
manual.
NOTE
- Use only AmySystems recommended parts.
D. MOTOR LOCKS
(fig.2)
Disconnect the motor locks when you need to manually
push the chair, for example when in an emergency, or if
batteries fail.
!
WARNING
1. Do not disengage motor locks unless power to the
chair is off.
2. Be aware that the chair will not have brakes in the
free wheel position.
3. Make sure that the person pushing the chair has full
control when motor locks are disengaged.
To Disengage Motor Locks:
• Pull the lever (B) in the neutral position to disengage
the motor lock.
To Engage Motor Locks:
• Push the lever (B) to return to the drive position.
NOTE
- If the lever is difficult to disengage, rock the wheelchair
slightly back and forth and/or push against the chair while
moving the lever.
IX. OPERATING GUIDE
A. BATTERY CABLE AND FUSES
(fig.1)
Your AmySystems Alltrack is equiped with 3 MIDI style
70A fuses.
NOTE
- In the unlikely event of a short circuit or heavy
overload, all power to your chair will be shut off. To reset your
chair, you will need to replace the battery harness and fuses.
To access the battery harness and fuses.
a - Squeeze tabs together to open the door.
b - Drop the panel down and pull out battery (A).
c - Replace the battery harness and fuses using the
supplied wiring instructions.
d - Push in batteries.
e - Lock the panel back in its upright position and
make sur the tabs are secured on each side of the
battery compartment.
Repeated Shutdown:
If the chair continues to blow fuses, have it serviced by a
supplier.
B. JOYSTICK ASSEMBLY
The joystick connects to a controller, which controls the
chair’s performance. The joystick varies based on the
option selected for you.
1. R-Net (Option)
t
IX. OPERATING GUIDE
A
1
B
2
Summary of Contents for R HybridHybrid
Page 1: ...Rev 01 February 2017...
