23
IX. OPERATING GUIDE
u
2. DRIVE LOCK-OUT
Drive lock-out is a safety feature designed to prevent the
wheelchair from being driven while in a tilt angle over 15°
relative to the horizontal position.
DANGER
Never operate the
wheelchair while in tilt with
an angle over 15° relative
to the horizontal position.
If the drive lock-out does
not stop the wheelchair
from operating when in a
tilt angle over 15°, have
the wheelchair or power
tilt system serviced by
an authorized dealer or
qualified technician.
J. POWER TILT
(Standard Operating Instructions)
!
WARNING
Make sure the wheelchair is on a level surface before proceeding
with tilt mode.
1. SINGLE ACTUATOR TOGGLE SWITCH
Increasing Tilt Angle
Pull the toggle switch (located next to the wheelchair
joystick) backward until the desired tilt angle is achieved,
then release.
Decreasing Tilt Angle
Release the toggle switch to the neutral position for a
minimum of 1 second and push the toggle switch (located
next to the wheelchair joystick) forward until the desired tilt
angle is achieved, then release.
LEVEL SURFACE
Summary of Contents for R HybridHybrid
Page 1: ...Rev 01 February 2017...
