AmySystems R HybridHybrid, Owner'S Manual

Page: 19 / 39

19
I. CANTILEVER & RECLINING ARMREST
ADJUSTMENT
(fig.6-7)
Both the Cantilever and Reclining armrests are height
adjustable, but they are not removable.
1. Cantiliver armrest adjustment
(fig.6)
a - To adjust, remove the two bolts (H) behind the
armrest with 2 7/16" wrench.
b - Reposition in the available holes for desired
height.
c - Retighten bolts on each side.
2. Reclining armrest adjustment on seat frame
(fig.6)
a - To adjust, loosen the screws (I) of the colar behind
the armrest with, a 3/16" Allen key ,and the bolt
(J) from the vertical tube.
b - Reposition to the desired height.
c - Tighten the screws (I) of the colar behind the
armrest, and install and tighten the bolt (J) on the
vertical tube.
d - To release the armrest, press the release lever (K)
towards the inside of the chair, then lift.
!
WARNING
Reinstall the bolts and tighten all the bolts securely.
H. DUAL-POST HEIGHT-ADJUSTABLE ARM RESTS
(fig.5)
The dual-post flip-back armrest can be used as either a
flip-back armrest or a removable armrest.
1. Installing Armrest
a - Insert front and rear posts into armrest receivers.
b - Engage lever (E) and insert the rear safety pin (F).
2. Set-up for Flip-back Operation
a - Disengage lever (E) so front post is able to come
free.
b - Armrest now has the ability to be flipped back
without removal.
3. Set-up for Removal
a - Disengage levers (E) and pull out the rear safety
pin (F) so both front and rear posts are able to
come free.
b - Armrest can now be easily removed for transferring.
4. Height-Adjustment
a - Release the upper securing lever (G).
b - Set at desired height.
c - Return securing lever to locked position.
d - Move armrest up or down to allow armrest to snap
into place.
VIII. SET-UP
u
6
7
I
J
H
K
E
F
5
G