AMX PTE-300, Operation/Reference Manual, Page: 39 / 44

Web Configuration Interface
35 PTE-300 PosiTrack Ethernet Camera Controller
Entering Fixed IP Addresses
Static IP addresses can be used to give the interface a known unchanging IP address. You will need to
specify the IP address, gateway, and mask to set the static IP address in a proper manner. You can specify
one static IP address. The gateway and mask values are used to initiate communications from the
interface to other computers.
To enter new Static IP Address information:
1.
From the IP Configuration page, click the DHCP: Disable radio button if it has not already been
selected. If DHCP is enabled, the Static IP fields will be grayed out and set to zero.
2.
Enter the new Static IP Address information. The factory default Static IP Address for the PTE-300
is 192.168.1.160.
3.
Enter the new Static IP Gateway information. The default Static IP Gateway for the PTE-300 is
192.168.1.2.
4.
Enter the new Static IP Mask information. The default Static IP Mask for the PTE-300 is
255.255.255.0.
5.
Click the Save Settings button. If the new parameters are acceptable, the new screen will read
"Restarting. Please Wait..." before moving to the Summary page.
6.
Click the IP Configuration link at the top of the Summary page to confirm that the fixed IP values
were changed.
All changes will take effect after rebooting of the PTE-300.