Web Configuration Interface
30
PTE-300 PosiTrack Ethernet Camera Controller
Telnet Summary
After logging in, the
AMX Telnet Summary
page (FIG. 31) displays the current information on the
Internet connection. From here, you may go to any particular section for specifics on the connection or
its management.
Any changes that are made to interface parameters are saved in persistent storage. Most changes to
interface parameters force the interface to restart, so be careful not to change these parameters while the
interface has other network connections, or these connections will be lost.
FIG. 31
Telnet Status page
Telnet Summary
Website Version
Shows the current Website version number.
Firmware Version
Shows the current version number of the firmware being used in the interface.
Hardware Version
Shows the hardware version on which the interface is running.
Ethernet MAC Address
Shows the interface’s Ethernet MAC address. Each interface has a unique
MAC address.
Free Space Remaining
Shows how much free space is remaining in the interface’s persistent (flash)
storage.
DHCP Address
Shows your current DHCP address. A value of 0.0.0.0 means that a DHCP
address has not been obtained either due to the DHCP server not having
allocated one or DHCP being disabled.
Static IP
Shows the static IP address that the interface will respond to. A value of 0.0.0.0
means that no Static IP address has been configured. Any other value takes
priority over the DHCP address.
Summary of Contents for PTE-300
