Upgrading the Firmware
26
PTE-300 PosiTrack Ethernet Camera Controller
3.
Click
OK
to proceed to the
Connect To
dialog (FIG. 27).
4.
In the
Connect using
drop-down menu, select
TCP/IP (WinSock)
.
5.
In the
Host address
field, enter the
IP Address
of the target PTE-300.
6.
Once the connection has been established, the HyperTerminal window is opened (FIG. 28). Note
that the Name for this session is indicated in the title bar of the window.
7.
Select
Transfer > Send File
to access the
Send File
dialog (FIG. 29). Locate and select the
firmware file that you want to load on the PTE-300.
a.
Click the
Browse
button to open the
Select File To Send
dialog. Locate and select the firmware
file that you want to load on the PTE-300 (
SW630_65_A_PTE300_VX_XX.KMT
).
FIG. 27
HyperTerminal - Connect To dialog
By default, the Port Number is set to
23
. Do not change this number.
FIG. 28
HyperTerminal - connected
FIG. 29
HyperTerminal - Send File dialog
Summary of Contents for PTE-300
