Upgrading the Firmware
25
PTE-300 PosiTrack Ethernet Camera Controller
Upgrading the Firmware
Overview
The PTE-300 features upgradable firmware, with updates available via the AMX website. Firmware
upgrades are accomplished via a Windows HyperTerminal session.
Before You Begin
Download the latest PTE-300 firmware file (
SW630_65_A_PTE300_VX_XX.KMT
) from
www.amx.com.
Verify that nothing is connected to Port 23 on your PC. This is the port used by HyperTerminal
to transfer files.
You will need the IP address for the PTE-300 in order to transfer the firmware file to the
device.
When using HyperTerminal, the PTE-300 must reside on the same LAN as your PC in order to
access it.
Upgrading the PTE-300 Firmware via HyperTerminal
1.
In Windows, launch the HyperTerminal program (select
Start > Programs > Accessories >
Communications > HyperTerminal
). The initial dialog (Connection Description) is shown in
FIG. 26:
2.
Enter a name for the session in the name field (example:
PTE-300
).
If you are using Windows 95/ 98 /98 SE, Windows 2000, Windows ME, Windows
NT4, or Windows XP, the Windows HyperTerminal program is included as part of the
operating system.
The factory default Static IP Address for each PTE-300 is 192.168.1.160, but this
may be changed via the Web Configuration Interface on page 29).
FIG. 26
HyperTerminal - Connection Description dialog
You can also select a specific icon to use, in case you want to create a shortcut for
this session for later use. By default, the dual-telephone icon is selected.
Summary of Contents for PTE-300
