![background image](http://html.mh-extra.com/html/amx/nxb-knx/nxb-knx_instruction-manual_2938124018.webp)
Configuration
12
NXB-KNX KNX Communications Gateway
Each of the options listed in the sub-menu are also accessible via options on the Clock Manager page (FIG. 17).
Clock Manager - Mode Manager
Select the main Clock Manager entry in the Admin Menu, or select
Mode
from the Clock Manager sub-menu, and the
Mode Manager
page will be displayed (FIG. 18):
The options on the Mode Manager page provide inputs for selecting the current mode of the system time:
FIG. 16
Clock Manager sub-menu
FIG. 17
Clock Manager options
FIG. 18
Clock Manager - Mode Manager page
Time Sync:
Use the radio buttons to select either
Network Time
or
StandAlone
.
Note: If using StandAlone mode, the time will be valid only until the unit is rebooted. Once
the unit is rebooted, the time will be lost, and will have to be reset.
Note that the
Daylight Savings
and
NIST Servers
tabs are enabled only if
Network Time
is
selected as the mode.
Re Sync Period:
Select the desired re-sync period for the clock from this drop-down menu.
Re-sync period options include 5 minutes, 15 minutes, 1, 2 and 4 hours (default =
1 hour).
Timezone:
Select the appropriate Time Zone from the drop-down menu.
Date:
Use these fields to manually enter today’s date (mm/dd/yyyy).