Configuration
8
NXB-KNX KNX Communications Gateway
1.
Enter a Device Number for this NXB-KNX unit in the
Device Number
text field.
2.
Click
Accept
to save your changes.
3.
Press
Reboot
to reboot the NXB-KNX and apply the new Device Number assignment.
Master Connection tab
The options in the
Master Connection
tab allow you to view and edit connection details for the NetLinx Master to which
this NXB-KNX unit will be connected (FIG. 11). Note that the
Master Connection
options can also be accessed directly
from the Admin Menu (select
Master Connection
).
To establish communication between the NXB-KNX and a specific NetLinx Master:
1.
Enter the Master’s IP/URL in the
Master IP/URL
text field.
2.
The default
Master Port Number
assignment is
1319
- do not change this number.
3.
Under
Authentication Settings
, enter the NetLinx Master’s
Username
and
Password
(only required if the target
NetLinx Master has Authentication enabled).
4.
Press
Accept
to save changes.
5.
Press
Reboot
to reboot the NXB-KNX. Once rebooted, the NXB-KNX should be in communication with the
Specified NetLinx Master (indicated by a steady blink on the NXB-KNX Status LED).
Security Settings
FIG. 11
Device Configuration page - Master Connection tab