![background image](http://html1.mh-extra.com/html/amx/nxa-wapzd1000/nxa-wapzd1000_operation-reference-manual_2937893019.webp)
Installation and Setup
15
NXA-WAPZD1000 ZoneDirector Smart WLAN Controller
1.
Review the wizard Confirmation entries. If you need to make a correction, click Back until the
appropriate setup screen appears, then make the changes.
2.
When the wizard Finish screen appears, note the instructions, including the IP address now assigned to
the NXA-WAPZD1000.These will enable you to log into the newly-configured NXA-WAPZD1000.
Connecting NXA-WAP1000s to your local area Ethernet network
To connect the NXA-WAP1000s to the local Ethernet network:
1.
Distribute the NXA-WAP1000s around your worksite, making sure they are 100 to 200 feet apart to
ensure the best coverage.
2.
Record each WAP’s Ethernet MAC address (printed on the bottom of every WAP), and note each devices’
exact worksite location.
3.
Connect each NXA-WAP1000 to an Ethernet port. When the NXA-WAP1000s have powered up, they
will automatically discover the NXA-WAPZD1000.
Accessing the NXA-WAPZD1000’s Command Line Interface
Aside from using the NXD-WAPZD1000’s Browser-Based Configuration Pages (page 19), you can also
perform many management and configuration tasks using the NXD-WAPZD1000’s Command Line Interface
(CLI) by connecting directly to the Console port.
To access the NXD-WAPZD1000 CLI:
1.
Connect an admin PC to the NXD-WAPZD1000 Console port (FIG. 2), using a DB-9 serial cable.
2.
Launch a terminal program, such as Hyperterminal, PuTTy, etc. (FIG. 2)
3.
Enter the following connection settings:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
4.
Click OK or Open to connect (depending on your terminal client).
5.
At the Please Login prompt, enter the admin login name (default: admin) and
password (default: admin).
The Setup Wizard will only appear when connecting to an NXA-WAPZD1000 in the
factory default mode. For more information on returning a device to the factory
default mode, please refer to the Resetting the NXA-WAPZD1000
section on
page 13
.
FIG. 2
Configuring a terminal client
Summary of Contents for NXA-WAPZD1000
