manualshive.com logo in svg

AMX NXA-WAPZD1000, Operation/Reference Manual, Page: 24 / 154

Share
Download
AMX NXA-WAPZD1000 Operation/Reference Manual Download Page 24

Dashboard

20

NXA-WAPZD1000 ZoneDirector Smart WLAN Controller

Dashboard

The Dashboard (FIG. 4) offers a number of self-contained indicators and tables that summarize the network 
and its current status. Some indicators have fields that link to more focused, detailed views on elements of the 
network.

The Dashboard indicators may be moved, refreshed, or hidden as needed. To move an indicator, click and drag 
the title across the Dashboard and release it on the desired location. Update the information in the indicator by 
clicking the Refresh icon on the right side of the indicator, and hide the indicator in the Add Widgets column 
by clicking the Hide icon on the right side.

FIG. 4  

ZoneDirector Dashboard with default indicators

Default Dashboard Indicators

System Overview:

Shows NXA-WAPZD1000 system information, including its IP 
address, MAC address, model number, maximum number of licensed 
APs, serial number, and software version number.

Devices Overview:

Shows the number of access points being managed by the NXA-
WAPZD1000, as well as the number of clients connected to these 
managed APs. It also shows the number of rogue devices that have 
been detected by the NXA-WAPZD1000.

Most Frequently Used Access Points:

Lists the access points that are serving the most client requests.

Usage Summary:

Shows usage statistics for the last hour and the last 24 hours.

Most Active Client Devices:

Identifies the most active clients by MAC address, IP address, and 
user name. Bandwidth usage is calculated in megabytes (MB) and is 
based on the total number of bytes sent (Tx) and received (Rx) by 
each client from the time it associated with the managed access point.

Currently Active WLANs:

Shows details of currently active NXA-WAPZD1000 WLANs.

Currently Active WLAN Groups:

Shows details of available WLAN groups. If you have not created any 
WLAN groups, only the 

Default WLAN

 group appears.

Most Recent System Activities:

Shows system activities related to NXA-WAPZD1000 operation.

Summary of Contents for NXA-WAPZD1000



























































































































































Reviews:

No comments