AMX NXA-WAPZD1000, Operation/Reference Manual, Page: 94 / 154

Configure Tab
90 NXA-WAPZD1000 ZoneDirector Smart WLAN Controller
Configuring Guest Subnet Access
By default, guest pass users are automatically blocked from the NXA-WAPZD1000 subnet (format: A.B.C.D/
M) and the subnet of the AP to which the guest user is connected. If you want to create additional rules that
allow or restrict guest users from specific subnets, use the Guest Access > Restricted Subnet Access section.
You can create up to 22 subnet access rules, which will be enforced both on the NXA-WAPZD1000 side (for
tunneled/redirect traffic) and the AP side (for local-bridging traffic).
To create a guest access rule for a subnet:
1.
Go to Configure > Guest Access.
2.
In the Restricted Subnet Access section, click Create New. Text boxes appear under the table columns in
which you can enter parameters that define the access rule.
3.
Under Description, type a name or description for the access rule that you are creating.
4.
Under Type, select Deny if this rule will prevent guest users from accessing certain subnets, or select
Allow if this rule will allow them access.
5.
Under Destination Address, type the IP address and subnet mask (format: A.B.C.D/M) on which you
want to allow or deny users access.
6.
If you want to allow or restrict subnet access based on the application, protocol, or destination port used,
click the Advanced Options link, and then configure the settings.
7.
Click OK to save the subnet access rule.
Repeat Steps 2 to 7 to create up to 22 subnet access rules.
Customizing the Guest Login Page
You can customize the guest user login page, to display your corporate logo and to note helpful instructions,
along with a “Welcome” title.
If you want to include a logo, you will need to prepare a Web-ready graphic file, in one of three acceptable
formats (.JPG, .GIF or .PNG). Make sure that the logo file does not exceed the following:

Length: Two inches on any side

File size: 20KB
To customize the guest login page:
1.
Go to Configure > Guest Access.
2.
Scroll down to the Web Portal Logo section.
3.
If your logo is ready for use, click Browse to open a dialog box that you can use to import the logo file.
(The NXA-WAPZD1000 will notify you if the file is too large.height or width).
4.
Scroll down to the Guest Access Customization section.
5.
(Optional) Delete the text in the Title field and type a short descriptive title or “welcome” message.
6.
Click Apply to save your settings. A Setting applied! confirmation message briefly appears.
Creating a Custom Guest Pass Printout
The guest pass printout is a printable HTML page that contains instructions for the guest pass user on how to
connect to the wireless network successfully. The authenticated user who is generating the guest pass will need
to print out this HTML page and provide it to the guest pass user. A guest pass in English is included by
default.
As administrator, you can create custom guest pass printouts. For example, if your organization receives
visitors who speak different languages, you can create guest pass printouts in other languages.
To create a custom guest pass printout:
1.
Go to Configure > Guest Access.
2.
Scroll down to the Guest Pass Printout Customization section (bottom of the page).
All guests share this same subnet access policy.