manualshive.com logo in svg

AMX NXA-WAPZD1000, Operation/Reference Manual, Page: 14 / 154

Share
Download
AMX NXA-WAPZD1000 Operation/Reference Manual Download Page 14

Introduction

10

NXA-WAPZD1000 ZoneDirector Smart WLAN Controller

Product Specifications

Common Applications

The NXA-WAPZD1000 is ideal for homes and businesses that require a robust and secure WLAN that can be 
easily deployed, centrally managed and automatically tuned. The NXA-WAP1000 is perfect for environments 
where high bandwidth applications such as video streaming are accessed simultaneously from several wireless 
devices such as iPads, laptops, and gaming consoles.

NXA-WAPZD1000 Specifications

Dimensions (HWD):

1 1/2” x 6 5/16” x 9 13/16” (39 mm x 159 mm x 250 mm)

Weight:

2.2 lbs (1 Kg)

Power Requirements:

• Input: 110 - 240V AC 

• Output: 12V DC, 1A 

Front Panel Components:

Power LED:

Green LED: the device is receiving power.

Status LED:

• Steady green LED: Device is configured.

• Blinking green LED: Device in factory default settings.

• Steady amber LED: Device is shut down but still connected to a power source.

• Flashing amber LED: Device is starting up or shutting down.

10/100/1000 Ethernet:

Two 10/100/1000Mbps RJ-45 ports for Ethernet connectivity.

• Solid green or amber left LED: The port is connected to a device.

• Blinking green or amber left LED: The port is transmitting or receiving data traffic.

• Green right LED: The port is connected to a 1000Mbps device.

• Amber right LED: The port is connected to a 100Mbps or10Mbps device.

Console port:

DB-9 port for accessing the NXA-WAPZD1000 command line interface.

Reset Button:

Hold the reset button for 8 seconds to reset the device.

Rear Panel Components:

110 - 240V AC Input:

One 110-240 power jack.

Operating Environment:

• 32°F - 122°F (0°C - 50°C)

• Operating humidity - 15% – 95% (non-condensing)

Certifications:

• FCC

• IC

• CE

• C-Tick

• VCCI

• EN 60950-1

• RoHS

Included Accessories: 

• External power adapter (for more information, refer to the 

Power Adapter 

Compatibility

section on page 11)

Other AMX Equipment:

• NXA-ENET8POE Gigabit PoE Ethernet Switch (

FG2178-62

)

• NXA-WAP1000 Smart Wireless Access Point, US Operation 

(

FG2255-51

)

• NXA-WAP1000 Smart Wireless Access Point, Operation Outside US 

(

FG2255-53

)

Summary of Contents for NXA-WAPZD1000



























































































































































Reviews:

No comments