manualshive.com logo in svg

AMX NXA-WAPZD1000, Operation/Reference Manual, Page: 113 / 154

Share
Download
AMX NXA-WAPZD1000 Operation/Reference Manual Download Page 113

Configure Tab

109

NXA-WAPZD1000 ZoneDirector Smart WLAN Controller 

12.

Finally, you can also import a wildcard certificate. If you do this, the NXA-WAPZD1000 will prompt you 
to fill in the NXA-WAPZD1000 redirect URL before proceeding.

13.

Once the private key matches and intermediate certificates are imported, clicking the Import button will 
start the Loading Certificate process. The following screen is displayed during the install and reboot 
process:

You have completed installing a new signed SSL certificate to the NXA-WAPZD1000. This allows you to 
connect to the NXA-WAPZD1000 securely using HTTPS without encountering browser security warnings.

SSL Certificate Advanced Options

The NXA-WAPZD1000 also provides three features for managing SSL certificates/private keys easily through 
the Browser-Based Configuration Pages:



Restore: Allows you to easily restore the factory default certificate/key at any time -- in case you 
have imported an SSL certificate that causes problems, you can always revert to the factory default 
and start over.



Back Up Certificate/Private Key: Allows you to save the key for use in another NXA-WAPZD1000 

or keep a copy in case the device needs to be factory reset and loses its current key.



Re-Generate Private Key: Only used to generate a new private key of a different length (when 
required by the Certificate Authority).

Saving an SSL Certificate or Private Key

Saving an SSL certificate to a local computer can be useful when deploying two NXA-WAPZD1000s in a 
Smart Redundancy configuration. Using the advanced options, you can export an SSL certificate from one 
device to the other. 

To share an SSL certificate and private key between two devices:

1.

Go to Configure > Certificates.

2.

Click Advanced Options to expand the options.

3.

Click Back Up Certificate, and save the file to your local computer.

4.

Click Back Up Private Key, and save the file to your local computer.

5.

Log in to the peer NXA-WAPZD1000, and import the certificate. (For more information, please refer to 
the Importing an SSL Certificate section on page 108.)

6.

After the certificate has been imported, the NXA-WAPZD1000 checks for private key match. 

FIG. 39  

Loading Certificate screen

Summary of Contents for NXA-WAPZD1000



























































































































































Reviews:

No comments