manualshive.com logo in svg

AMX NXA-WAPZD1000, Operation/Reference Manual, Page: 35 / 154

Share
Download
AMX NXA-WAPZD1000 Operation/Reference Manual Download Page 35

Monitor Tab

31

NXA-WAPZD1000 ZoneDirector Smart WLAN Controller 

WLANs

The tables on the WLANs page currently active WLANs, currently active WLAN Groups, and an up-to-date 
record of WLAN events/activities.

FIG. 9  

Monitor Tab - WLANs

Monitor Tab - WLANs

Currently Active WLANs:

This is a listing of the currently active WLANs being managed by the 
NXA-WAPZD1000.

Names/ESSIDs:

The name or ESSID of the individual WLAN.

Authentication:

The authentication mode being used by the WLAN.

Encryption:

The encryption mode being used by the WLAN.

Clients:

The number of clients accessed by the WLAN.

Currently Active WLAN Groups:

This is a listing of the currently active groups of WLANs being managed 
by the NXA-WAPZD1000.

Name:

The name used for the WLAN group.

Description:

(Optional) A more detailed description of the WLAN group.

WLANs:

The WLANs included within the group.

Events/Activities:

This is a breakdown of all activities engaged through WLANs managed 
by the NXA-WAPZD1000.

Date/Time:

The date and time of the logged event.

Severity:

The determined alert level for the event.

User:

The WLAN producing the event.

Activities:

The specific activity being logged.

Show More:

Click this button to show 15 more previous events.

Summary of Contents for NXA-WAPZD1000



























































































































































Reviews:

No comments