AMX Novara SP-08-E-US, Instruction Manual

Page: 18 / 37

Button Labeling
11 Instruction Manual - Novara Ethernet Keypads
Button Labeling
Overview
Novara Ethernet Keypads come with a set of clear plastic Key Caps, which are designed to fit tightly over the
pushbuttons, and allow you to place a label on each button according to the requirements of your particular installation.
Novara Ethernet Keypads also come with a pre-printed acetate sheet with a range of 50 (pre-cut) button label inserts. The
button labels provided will accommodate most installations, but it is also possible to print your own button labels on
acetate for custom button labeling.
Removing/Replacing Button Labels
The button labels on Novara Ethernet Keypads are acetate inserts that fit inside the key caps installed on the pushbuttons.
To change the inserts, you must remove the key caps. Removing the key caps on Novara Ethernet Keypads requires
disassembling the keypad, so that you can access the key caps through the rear of the faceplate.
Disassembling the Novara Ethernet Keypad
Important: Remove power from the keypad, and discharge any static electricity from your body by touching a grounded
metal object before performing the following steps.
This procedure requires a Phillips-head screwdriver.
FIG. 8 Acetate Button Labels and plastic Key Caps